Tag Archives: Barrow Common

Great Weston Conservation Area Appraisals (CAA) Consultation opportunities

1) Online eConsult

The draft Great Weston Conservation Area Appraisal work is now on  eConsult. – North Somerset Council’s public consultation platform.  All five documents that make up the draft appraisal work can be accessed via eConsult.

Here is the link: www.n-somerset.gov.uk/westonconservation

2) Public Consultation event – Public workshop Tuesday 25th September. 5.30pm- 7.30pm. Weston Museum. Burlington St. WsM

Over and above the eConsult opportunity we are hosting a public workshop.

The public / stakeholders are invited to register to attend a workshop to discuss the draft reports.

The two hour workshop provides the opportunity to consider the draft Appraisals and to feed in your views.

To get further information about the workshop and to reserve a place please click on this link:

https://westonconservationarea.eventbrite.co.uk

Background:

We are currently working with Consultants (Allies and Morrison) to develop draft Conservation Area Appraisals and Management Plans for Weston. With the intention to present to North Somerset Council Executive meeting on 4th December for adoption.

The proposal is to merge the current Conservation Areas in Weston into one Conservation Area that is subdivided into four separate character areas. This includes adding to the footprint by including the town centre and residential areas around Ellenborough Park and Clarence Park.

There are 5 reports to consider.  The first is an introduction to the concept of the Great Weston Conservation Area.  There are then four character appraisals for: Hillside area, Seafront area, Town Centre area and the Whitecross area. You are welcome to comment on all of the reports or some of them.

 

 

 

Tin Tabernacles

As the population of Britain grew during the 19th century, the Church of England, Roman Catholic Church and non-conformist denominations needed new affordable churches, which could be erected quickly.  A series of religious revivals during the 19th and early 20th century also led to an increase in the number of people attending churches.

Folding a sheet of iron gives it stiffness and rigidity.  In the 1820s Henry Palmer, an engineer from London, developed a new method of corrugating iron.   Richard Walker realised that Palmer’s corrugated iron could be used for cladding buildings such as warehouses.  Then in 1837 hot dip galvanising was invented by a French engineer called Stanislas Sorel.  Galvanising is the process by which iron is coated with a thin layer of zinc, thus preventing it from corroding and greatly increasing its life span.  Tin was never used for coating corrugated iron for buildings. 

Large scale production of prefabricated corrugated iron buildings began in the 1850s.  Churches, chapels and mission halls were designed and built in flat pack kit form and sold via catalogues.  These churches were nicknamed tin tabernacles.  A tabernacle is “a temporary dwelling; generally movable, constructed of branches, boards, or canvas; a hut, tent, booth” (Oxford English Dictionary).  Most tin tabernacles were intended to provide short term accommodation for church congregations while they raised money to build a more permanent church.  However many were never replaced by more durable structures.

Tin tabernacles were built on a brick or rubble and mortar foundation.  They were timber framed and clad on the outside with galvanised corrugated iron.  Corrugated iron sheets were rigid and light enough to span between roof beams unsupported.   The sheets could be overlapped to form an interlocking and watertight roof.

The inside walls were usually lined with wooden tongue and groove boards.  The flooring was either beaten earth, flagstones or suspended wooden floorboards.  The buildings were insulated with felt placed between the inner and outer walls. The windows were sometimes rectangular but many churches had Gothic arch windows.  Some had small steeples or bell towers on their roofs.  Lighting was usually provided by paraffin lamps.  In urban areas this was later replaced by gas lighting.  Small coal or wood burning stoves were sometimes installed to heat the buildings.

Prefabricated corrugated iron buildings were made by several different British companies in cities such as London, Liverpool, Manchester, Edinburgh, Glasgow and Norwich (Boulton and Paul).  In addition to churches, they also made a variety of other types of buildings e.g. houses, village halls, synagogues, school rooms, temperance halls, hotels, bunkhouses, sports pavilions, hospital wards and warehouses.  Many were exported to Canada, Australia, California and Africa, especially during their gold rush periods.  The peak period for the production of corrugated iron buildings was probably the 1890s.

Most tin tabernacles were eventually demolished or are now derelict.   A few have been converted to other secular uses but some are still in use as churches. The tin tabernacle former Baptist Chapel on the A38 at Barrow Common is in good condition but doesn’t seem to be in use as a church.  It was built at some point between 1913 and 1930. Elsewhere in Somerset tin tabernacle churches are still in use at Edithmead, Langley Marsh, Porlock Weir and Alhampton near Ditcheat.

Tin Tabernacle
Barrow Common Tin Tabernacle
Tin Tabernacle 2
Barrow Common Tin Tabernacle

Further Reading:

Ian Smith: Tin Tabernacles: Corrugated Iron Mission Halls, Churches & Chapels of Britain, published by Camrose Media in 2004